Output Setting tab
This tab is used to configure the output settings.
It displays the general output settings for both printing and cutting.
The setting items will differ depending on the screen from which the tab is accessed.
- When accessed from Canvas screen
Setting | Description |
---|---|
[RL7 Favorite Hot Folder] | Specifies the hot folder for the output printer set in advance in RasterLink7. |
[Sheet Size] | Sets the sheet size. |
[Offset] | Sets the offset value from the printer/plotter origin (lower right). |
[Copy] | Sets the number of output data copies. |
[Copy Margin] | Sets the copy margins for the output data. |
[Rotate] | Specifies the rotation angle for the output data. |
[Mirror] | Sets horizontal or vertical mirroring of the output data. |
[Register Mark] | Sets register marks for the output data. |
[Fill around the register mark] | Sets filling around the register marks. |
[Put a print direction mark] | Sets whether to print output direction marks. |
- When accessed from Design placement screen
Setting | Description |
---|---|
[RL7 Favorite Hot Folder] | Specifies the hot folder for the output printer set in advance in RasterLink7. |
[Sheet Size] | Sets the sheet size. |
[Offset] | Sets the offset value from the origin (lower right). |
[Register Mark] | Sets register marks for the output data. |
[Fill around the register mark] | Sets filling around the register marks. |
[Put a print direction mark] | Sets whether to print output direction marks. |
[Print form outline] | Sets whether to print the form frame outline. |
[Cut form outline] | Sets whether to cut the form frame outline. |

The register marks that can be set will differ depending on the screen from which the tab is accessed.
- When accessing from the Design screen
Individual register marks, overall register marks - When accessing from the Design placement screen
Overall register marks